Publicidad
Idiomas disponibles
Idiomas disponibles
RULES OF FACILITY
The requirements of the place
a)
1.-The distance from detection No can be to further 1.5m _ _ of objects
of metal I Tomas feeding of high voltage
2.-The deactivator must be at one distance elderly of 1.5m from the
source.
3.-Any guy focus halogen, neon, etc. has to be to a distance greater
than 1.5m.
b)
Factors of interference:
1.-Delete equipment of interference active:
Cause interference: motors, dryer hair, electric drills and others
electronic devices high power;
A problem of feeding can cause a problem serious in the operation
Is indispensable the use of Land Physical inside of installation.
2.-It should not exist no large object of metal or food high voltage
110/220VAC (u other high voltage lines)
equipment should be around a distance from 1m.
3.-
The
_
interference passive: large metals and systems RF,
wire in rolls, cashiers automatic and collection boxes,
printers, etc.
2
:
.
.
The location of the EAS
Rules important for the facility:
1.-Validate that has all parts necessary for the installation of the system.
2.-Assemble the detector of EAS (within the permitted range
according to the specification), confirm separation and installation
.
3.-Yes there is some interference around, it must find first reason
for the interference before of continue with the facility.
4.-After decide the location of installation of EAS team, dial the
holes and perform the connections.
5.-With a electronic drill with ø12 cut, make the holes with a width of
10mm,10mm depth (the depth of the slot can depend on the site
conditions ).
6.-When HE is filled he job prove partially operation and then fix with
plastic cement or resin.
7.-All the connections of the cables they must be armored
including wire of line and the wire of feed See
8. - Security everything, when this in process of installation, the
teams must be without food, and you must use the team of
adequate protection.
9.-The connections of all power cables must be insulated or welded,
the connection between antennas must be duly hidden above the slot.
.
3
Publicidad
