Tennant IPC PW-E101 Manual De Instrucciones página 22

DESCRIPTION OF SYMBOLS
DO NOT DIRECT THE JET
AGAINST
MALS, POWER SOCKETS
OR THE MACHINE IT SELF.
MAINS POWER
ATTENTION:
ELECTRIC SHOCK.
EARTH
WATER INPUT.
WATER OUTPUT.
SWITCHING OF THE PUMP
MOTOR.
SWITCHING ON THE HEA-
TING SYSTEM.
WATER
ADJUSTMENT.
ANOMALY INDICATION
PROGRAMMED
NANCE INTERVAL EXPI-
RED.
CHEMICHALS
(DETERGENT).
ANTI-SCALE PRODUCT.
20
PEOPLE, ANI-
- The electric connection must be
performed by qualified technicians who
are able to work in observance of the
governing rules (in compliance with the
provisions of the IEC 60364-1 standard)
RISK OF
and of the manufacturer's instructions.
A wrong electric connection may cause
damage to persons, animals or things,
and the manufacturer
considered responsible for these.
- The H.P. cleaners with power lower
than 3 kW are equipped with a plug for
connection to the electric supply.
In this case please check if the electric
power system and the electric sockets
are compatible with the max. power of
the appliance indicated on the plate.
(kW). In case of doubt, please apply to
qualified personnel.
If the socket and the plug of the
machine are not compatible, have the
plug replaced with a suitable type by
qualified personnel.
- Before connecting the machine make
sure that the data indicated on the
TEMPERATURE
plate correspond to those of the electric
supply.
- Do not use extensions to power the
MAINTE-
high pressure washer.
If you use an extension, the plug and
socket must be watertight. Unsuitable
extensions may be dangerous.
EN - english
GENERAL SAFETY RULES FOR
THE USE OF HIGH PRESSURE
CLEANERS
Warning
cannot be