Tennant IPC PW-E101 Manual De Instrucciones página 25

it from the water main and from the
electricity main via the omnipolar switch
or by unplugging the plug in the case of
water cleaners rated at less than 3 kW)
without tampering with it.
Apply to one of our technical service
centres.
In the event of accidents, seek medical
advice or emergency treatment.
As for the protection against electric
shock, the H.P.cleaner belongs to
CLASS I.
Failure to observe the above warning
frees the manufacturer from all
responsibility and constitutes negligent
use of the product.
This appliance is intended exclusively for cleaning
machines, vehicles, buildings and general surfaces
suitable for treatment with a high pressure jet of de-
tergent solution between 25 and 250 bar (2,5÷25
MPa) (360 - 3600 PSI). This appliance has been de-
signed for professional and commercial use.
This appliance has been designed for use with the
detergents supplied or recommended by the manu-
facturer. The use of other detergents or chemicals
may influence the safety of the appliance.
This appliance must be used only for the purpose for
which it was specifically designed.
All other uses are to be considered incorrect and the-
refore unreasonable.
Examples of unreasonable use:
- Washing surfaces not suitable for cleaning with a
high pressure jet.
- Washing people, animals, electric equipment or the
machine itself.
- Using unsuitable detergents or chemicals.
- Blocking the trigger (lever) of the lance in delivery
position.
The manufacturer cannot be held responsible for
any damage due to improper, incorrect or unreaso-
nable use. As far as safety rules are concerned, the
cleaners are manufactured according to the Europe-
an Standard.
EN - english
CLOTHING AND
EQUIPMENT
Wear safety shoes with non-slip
soles.
Wear protective goggles or visor
and safety garments.
You are recommended to wear
overalls to reduce the risk of
injury caused by involuntary con-
tact with the high pressure jet.
Depending on the surface being
cleaned and the environment,
the protective measures neces-
sary for pulverised mists may
include respiratory masks with
class FFP2 or equivalent or hi-
gher protection.
INTENDED USE
23