CASO DESIGN BaristaChef Inox Manual Del Usuario página 23

4.2 Controlelements
13
Display: Shows the number of cups
or grinding time
14 "Cup" button has been selected
15
"Time" button has been selected
16
"Cup" button: To select the number of
cups (2-12 cups)
4.3 Assembling
1. Place the device on a fl at surface.
2.
Check that the grinding mechanism (4) is sitting correctly in the base of the device (see
the illustration in the "Cleaning and care" section).
3.
Place the bean container (2) on the appliance. The arrow
coarseness (3) on the front should point to the symbol
4.
Turn the bean container to tighten it. The arrow
bean container should click into place.
4.3.1 Assembly for use with the collection container
1.
Assemble the device as described above.
2.
Remove the silicone cover (10) from the collection container lid (11) and place the collec-
tion container (12) under the coff ee ground outlet (7).
4.3.2 ssembly for use with the portafi lter holder
1.
Assemble the device as described above.
2.
Attach the portafi lter holder (8) to the
three screws on the base of the device by
placing the holes in the holder over the
screws on the base and then pushing the
holder down onto the device.
3.
You can use portafi lters with a diameter
from 52 to 58 mm. Portafi lters with a dia-
meter of 58 mm can be placed directly on
13
16 17 18
17
"Start/Stop" button: To start and stop
the device
18 "Time" button: To set the grinding
time (1-40 seconds)
next to the control ring for
on the base of the device.
should point to the
CASO BaristaChef Inox
14
15
symbol and the
23
DE
EN
FR
ES
NL
SV
TR