Publicidad
Idiomas disponibles
Idiomas disponibles
7.1 Safety notices
ATTENTION
Repairs of electrical appliances must be carried out by qualifi ed person who are trained by
the manufacturer.
Repairs performed by untrained persons may result in considerable hazards for the user
and damage the machine.
7.2 Troubleshooting table
Problem
The device does not start.
The display shows "E1" and the but-
tons don't work.
The display shows "E3" and all the
buttons fl ash.
The motor starts but no coff ee
grounds come out of the coff ee
ground outlet or the device stops
suddenly during the grinding
process.
PLEASE NOTE
If you cannot solve the problem by carrying out the steps described above, our Cus-
tomer Service will help you free of charge.
Clean the device before you send it to customer service.
8
Disposal of the Old Device
Old electric and electronic devices frequently still contain valuable materials.
However, they also contain damaging substances, which were necessary for their
functionality and safety. If these were put in the non-recyclable waste or were
handled incorrectly, they could be detrimental to human health and the environ-
ment. Therefore, do not put your old device into the non-recyclable waste under
any circumstances.
PLEASE NOTE
Utilise the collection point, established in your town, to return and recycle old electric
and electronic devices. If necessary, contact your town hall, local refuse collection
service or your dealer for information.
Ensure that your old device is stored safely away from children until it is taken away.
Solution
Please check whether the plug is properly plugged in.
The device is overheated. Remove the plug from the
socket. Let the device cool down 10 minutes before
you try using it again.
The bean container is not correctly installed. Assemble
the device correctly.
The device is blocked. Turn the appliance off and remo-
ve the bean container. Clean the grinding mechanism
and the grinding auger.
CASO BaristaChef Inox
DE
EN
FR
ES
NL
SV
TR
27
Publicidad
