Publicidad
Idiomas disponibles
Idiomas disponibles
14 | English
If the non-rechargeable batteries are empty, the laser lines will flash quickly for approx.
10 s, then the measuring tool will switch off.
Always replace all the batteries at the same time. Only use batteries from the same man-
ufacturer and which have the same capacity.
Take the batteries out of the measuring tool when you are not using it for a pro-
u
longed period of time. The batteries can corrode and self-discharge during pro-
longed storage in the measuring tool.
Operation
Starting Operation
Protect the measuring tool from moisture and direct sunlight.
u
Do not expose the measuring tool to any extreme temperatures or fluctuations in
u
temperature. For example, do not leave it in a car for extended periods of time. If it
has been subjected to significant fluctuations in temperature, first allow the measur-
ing tool to adjust to the ambient temperature and then always carry out an accuracy
check before continuing work (see "Accuracy Check of the Measuring Tool",
page 15).
The precision of the measuring tool may be compromised if exposed to extreme tem-
peratures or fluctuations in temperature.
Avoid substantial knocks to the measuring tool and avoid dropping it. Always
u
carry out an accuracy check before continuing work if the measuring tool has been
subjected to severe external influences (see "Accuracy Check of the Measuring Tool",
page 15).
Switch the measuring tool off when transporting it. The pendulum unit is locked
u
when the tool is switched off, as it can otherwise be damaged by big movements.
Switching On/Off
Before all work, turn the measuring tool on the magnetic rotating mount (3) so that the
outlet aperture (1) is not obstructed.
To switch on the measuring tool, slide the on/off switch (2) to the "ON" position. Imme-
diately after switching on, the measuring tool sends laser lines out of the outlet aperture
(1).
Do not direct the laser beam at persons or animals and do not stare into the laser
u
beam yourself (even from a distance).
To switch off the measuring tool, slide the on/off switch (2) to the OFF position. The
pendulum unit is locked when the tool is switched off.
1 609 92A 8C4 | (05.07.2023)
Bosch Power Tools
Publicidad
