SAFETY PRECAUTIONS
If the tool becomes hot, interrupt the work and wait for it to
cool down before use.
Failure to observe this may cause burns.
To disconnect the power plug, always hold the power plug
without pulling the cord.
Pulling the cord may cause electric shock or short circuit.
Before use, check the tool, pointed tool, and other parts for
any damage and confirm their normal operation.
Failure to observe this may cause damage, resulting in injury.
Keep the workplace clean.
Mandatory
A disordered workplace or work table may lead to an accident.
Consider well how to handle and work, pay attention to the
surrounding environment, and use common sense during
work.
Failure to observe this may cause an accident or injury.
When installing the power adapter on a wall, securely screw it
to prevent it from falling.
Otherwise, the power adapter may fall, injuring someone.
Do not put the tool in a place accessible by a child.
Failure to observe this may cause an accident or trouble.
Do not store the main body in a place where the temperature
may rise to 50 °C or higher.
Failure to observe this may lead to abnormal operation.
Prohibited
Do not use the tool in such a forceful manner that causes the
motor to lock.
Failure to observe this may cause smoke or fire.
In order to work safely and efficiently, work at a speed that matches the
ability.
8
EN
Always adhere to the instructions
CAUTION
CAUTION
Do not work in an unusual position.
Otherwise you may fall over and be injured.
Always stand on a stable footing and keep a good balance.
Do not use the tool when you are tired.
Failure to observe this may cause an accident or injury.
Do not allow a child or any other person who is not an
Prohibited
operator to come near the workplace or touch the tool.
Doing so may cause injury.
Do not hold only the cord to carry the tool.
Doing so may cause the tool to fall, resulting in injury.
9
EN