Publicidad
EN
Power Bank
Status
High-capacity
battery is under-
voltage.
High-capacity
battery is too hot
or too cold.
Power bank
operates normally.
Charging a
defective portable
battery pack.
Power bank
operates normally.
Charging a hot
or cold portable
battery pack.
MOUNT THE POWER BANK (FIG. E)
Wall-mount holes for one power bank
1.
Disconnect the power bank from the hub and
remove the battery packs.
2.
Put the power bank against the wall on the floor.
3.
Secure two brackets (included) to the two sides of
the power bank with four M8 x 50 bolt and washer
sets (included), using the provided hex wrench.
12
56 VOLT PGX
POWER BANK
High-
capacity
DC Status
Battery-
Indicator
bay Status
Indicator
Flashing red
Solid green
Solid red
Solid red
Solid green
Solid green
Solid green
Solid green
POWER BANK — PGX1400PB
TM
Portable
HIGH-CAPACITY
Battery-
BATTERY
bay Status
Indicators
Or
Off
Flashing red
Off
Solid red
Flashing red
Solid green
Solid red
above the
portable
battery
Solid green
pack being
charged.
4.
Mark the locations of the four wall-mount holes at
the desired location on a wall.
5.
Use four M8 x 25 bolt and washer set (included) to
securely mount the power bank to the wall.
NOTICE:
Mounting surface should be at least 19 mm
thick to securely support the power bank.
PORTABLE
BATTERY
Off
Off
Off
Off
Publicidad
