Publicidad
Idiomas disponibles
Idiomas disponibles
Working in Pulse mode with a detector:
For outdoor work under direct sunlight or bright conditions,
and for extended indoor ranges of up to 60 meters (200 ft.),
use the pulse mode with a detector.
1. Push the POWER switch to ON mode.
2. Press the Pulse mode button (d) to activate it. The Pulse
mode indicator (d) will turn on.
3. Turn on the detector and search for the laser beam.
4. While in Pulse mode, you can select different beams by
pressing the appropriate beam selector buttons.
5. To switch off the Pulse mode, press the Pulse mode
button (d) again. The Pulse mode indicator (d) will turn off.
12
Publicidad
