Starting to use the appliance
1. Take the electric Oven and all accessories from the packaging.
Danger of contusion!
When opening and closing the door, do not place your fingers/hand between
the door hinges. They could be crushed.
2. Before using the appliance for the first time, it and all of the accessories must be
cleaned free of possible packaging residues. Clean the accessories with a hand warm
and mild detergent solution and then dry them ab.
3. Wipe the appliance housing with a cloth lightly moistened with water and then dry it
carefully.
4. When the appliance is completely dry inside and out, insert the plug into a suitable
power socket
220-240V~
5. Now switch the appliance on, without the accessories and without foodstuffs. Leave
the appliance door completely open.
6. Select the setting 230°C with the temperature control switch. Place the main function
switch to upper and lower heat.
7. Place the timer switch at 15 minutes.
The appliance allows itself to be switched on with the timer switch. As soon
as the time switch is set the control lamp glows.
As the heating elements are lightly greased, a slight smell may occur when
first putting them into operation. This is harmless and stops after a short time.
Open a window and provide for sufficient ventilation.
8. When the appliance has switched itself off automatically, place the main function
switch to OFF.
9. Remove the plug from the power socket and wait until the appliance has cooled itself
down.
10. Then clean the grill and baking area with a cloth lightly moistened with water and then
dry it carefully.
Switching off and transportation
Switching off
•
Set the main function switch (heating selector) and the timer switch to OFF position.
Unplug the power plug from the socket.
Transporting
•
If you wish to transport the oven to a different location, first allow it to cool down.
•
Remove the power cord from the socket.
•
Wind the power cord around the bracing hooks at the back of the appliance.
50/60Hz.
English -
6