Publicidad
Idiomas disponibles
Idiomas disponibles
Operation
Grilling and baking
1. Remove the roasting grill and baking tray from the appliance. If required, cover these
with baking paper and smear the baking tray with butter or oil.
2. Allow the appliance to heat up for ca. 10 minutes (dependant on the setting) to the
required temperature:
- Select the required temperature with the temperature control knob.
- For grilling, you must always select the highest temperature (230°C).
- Then, select with the function switch either upper heat (e.g., for toppings), lower
heat (e.g., for cakes) or upper and lower heat (e.g., for Pizza). If you want to grill,
always select the setting upper heat with the function switch.
- With the time switch set the pre-heat time (ca. 10 minutes).
- Close the glass door.
3. When the warm-up period is finished, place the foodstuffs on the roasting grill or in
the baking tray and slide it in on one of the runners. Ensure that there is sufficient
space between the foodstuffs and the inner walls/heating elements of the appliance.
The most uniform baking results are obtained when the baking tray and the
roasting grill are placed on the central runner.
4. Close the glass door before starting the grill or baking process.
If you are cooking especially fatty foodstuffs, an increased smoke development
can occur. In this case, do not close the glass door completely; instead, allow it
to be slightly open:
If you carefully push the door to, it comes into this position shortly before closing.
5. Adjust the time switch to the required grilling or baking time.
6. The maximum grilling or baking time is 60 minutes.
7. If the cooking time for the foodstuff amounts to less than 5 minutes, first of all place
the time switch more than 6 minutes and then turn it back to the required grilling or
baking time.
8. The control lamp indicates that your electric oven is switched on. The switch of the
time switch now rotates itself anti-clockwise towards OFF.
When your electric oven has reached the set temperature, the heating elements
switch themselves off at intervals, to ensure that the temperature is maintained.
9. The appliance switches itself off automatically on completion of the programmed time.
If you wish to switch the appliance off prematurely, turn the time switch back to OFF.
Place the function switch at the position OFF and remove the plug from the power
socket. You will hear a signal sound and the control lamp extinguishes.
7
English -
Publicidad
