Stopping The Brew Process; Adding Water - Kitchen Living RJ30-ALDI Manual Del Usuario

USA
Instructions

STOPPING THE BREW PROCESS

If you need to stop the brewing after the process has started, press and
release the Power Button to turn the Brewer "OFF", or press and release
stop; the heating element will shut off.

ADDING WATER

the water level in the tank is low or the Water Tank is not securely in place.
The Brewer will not allow you to brew when the Power and Brew Buttons are
1. Lift up the Water Tank Lid and pour water directly into the Water Tank while
it is still attached to the Brewer, then close the Lid.
the Water Tank straight up. Fill with water. Place the Water Tank back on the
Brewer and close the Water Tank Lid.
IMPORTANT: Do not remove the Water Tank during the brewing process.
BREWING ICED BEVERAGES
Your iced tea and iced coffee taste best when fresh-brewed hot over ice. Try
press the Brew Button. Also, look for specially marked portion packs that are
specially crafted to brew over ice!
IMPORTANT: Do not brew into a cup made of glass. Doing so may cause the
glass to crack or break.
TURNING OFF YOUR BREWER
The Brewer is programmed to automatically power itself off after 5 minutes of
inactivity. To turn your Brewer off manually simply press and release the Power
Button.
10
customerwarranty@rjbrands.com
MODEL: RJ30-ALDI PRODUCT CODE: 47047 12/14
Single Cup Brewing System
AFTER SALES SUPPORT
888-315-8407
USA