USA
Instructions
Set Up & First Brew
IMPORTANT: Before using your Single Cup Brewing System please follow the
instructions below. The Brewer will not function properly unless these steps
are followed.
NOTE: If Brewer has been exposed to temperatures below freezing, allow
Brewer at least two hours to reach room temperature before brewing. A frozen
or extremely cold Brewer will not operate.
SETTING UP YOUR BREWER
1A
1B
Figure 1A & 1B
1. Unwrap cord and plug the Brewer into a grounded outlet. Remove all pieces
of packing tape and plastic stickers.
2. Place a mug (10 oz. minimum) on the Drip Tray.
the Water Tank straight up. Rinse with fresh water.
5. Place Water Tank base into the back of the Brewer and be sure the Water
while water comes out from the Spout.
7. Press and release the Power Button, and wait until the Brew Buttons stop
Your Single Cup Brewing System is now ready to use.
8
customerwarranty@rjbrands.com
MODEL: RJ30-ALDI PRODUCT CODE: 47047 12/14
8 oz.
10 oz.
Figure 2
Single Cup Brewing System
8 oz.
1
0 oz.
Figure 3
AFTER SALES SUPPORT
888-315-8407
USA