DRAMINSKI TwistGrain Manual De Uso página 26

LANGUAGE
This menu enables you to select your preferred
interface language.
Calibration
Language
Display
ESC OK
s t
Select "Setup" → "Language" and press "OK".
You will see a list of available languages. Highlight
one of the languages in the list and press "OK". The
meter will automatically switch to, and save, the new
setting.
English
Polski
Deutch
ESC OK
s t
DISPLAY
You can use this menu to change the display
brightness and backlight time (the lower the
settings, the longer the batteries will last).
24
Select "Setup" → "Display" and press "OK".
You will see 2 options: "Brightness" and "Backlight
time". Select one of them, press "OK", select your
setting and press "OK" to accept it.
Calibration
Language
Display
Brightness 30%
Backlight time 50%
100%
Brightness 5 s.
Backlight time 10 s.
20 s.