Zamel Supla mSLW-02 Manual De Instrucciones página 33

Enter Wi-Fi Network name and password
to use with new I/O Device
Remember password
CONNECTING THE DEVICE
Wire the power supply to the
device as shown in the diagram.
Make sure that the device
STATUS LED responds as shown
in the animation on screen.
If it does not, switch the device
into the configuration mode by
holding the CONFIG button
on the device. Next, press
the START button.
NETWORK PASSWORD
Choose a WiFi network to
enable Internet connectivity for
the device. Enter the network
password and tap "Next"
to continue.
6
33
7
Assisted Configuration