Publicidad
Idiomas disponibles
Idiomas disponibles
Installing your thermostat
3 Label wires.
Do not label by wire color.
the supplied sticky tags to label
each wire as you disconnect it.
Label wires according to the old
thermostat terminal designations,
not by wire color.
Note:
If no tag matches a
terminal designation, write the
appropriate letter on a blank
sticky tag.
4 Remove wallplate.
Remove the old wallplate from
the wall after all wires have been
labeled and disconnected.
5 Separate thermostat and its wallplate.
On your new thermostat, grasp the
finger holds on the top and bottom of
the wallplate with one hand and the
thermostat (front) with the other hand.
Pull pieces apart.
33-00131ES—01
Use
4
C
Thermostat
Wallplate (back view)
Sticky tag
Blank tags
Terminal
designation
MCR31537
Finger holds
M31538
Publicidad
