Amica MM 3011 Manual De Instrucciones página 13

The motor unit does not start
or the cutting blade does not
rotate.
The shredding tube cannot be
removed from the base.
The grinding result is poor.
Overload protection:
This appliance is equipped with thermal motor protection. If the
appliance overheats, it turns off automatically. Unplug the appli-
ance and allow it to cool to room temperature. Then insert the
plug back into the wall power socket and turn on the appliance.
Contact your dealer or authorised service centre if the overload
protection is triggered too frequently.
CLEANING AND CARE:
Before first use, thoroughly wash the parts in contact with food.
Before removing accessories or cleaning the motor unit, turn off the
appliance and disconnect the plug from the wall socket.
Do not immerse the motor unit in water or rinse it under running
water. Do not wash metal parts in the dishwasher.
Clean the base with a damp cloth.
Wash the removable parts with a soft brush in water with detergent,
rinse with clean water, and then immediately wipe dry with a soft
cloth.
If the appliance will not be used for a long time, lubricate the sur-
faces of the grinding plate and cutting blade with cooking oil. Lightly
coat metal parts with grease or cooking oil to prevent rusting.
The motor unit will be damaged if the worm shaft cannot rotate.
- Make sure the plug is proper-
ly inserted into the wall outlet.
- The motor overload protec-
tion may have been activated
(see overload protection).
- Check if the release button
is pressed.
- The release button does not
work.
- Check if the cutting blade,
grinding plate and screw-on
ring are properly assembled.
- Tighten the ring.
•
13
EN