FOR USE WITH RYRM8006
RYOBI ELECTRIC 42 in. LAWN TRACTOR
WARNING:
To reduce the risk of injury, user must read and under-
stand the operator's manual for their riding lawn mower
before using this accessory. Save these instructions.
Refer to them frequently and use them to instruct other
users. If you loan someone this product, loan them these
instructions also.
WARNING:
Always protect hands by wearing heavy gloves and/or
wrapping the cutting edges of the blade with rags and
other material when performing blade maintenance. Con-
tact with the blade could result in serious personal injury.
INSTALLING BLADES
See Figures 1 - 2.
WARNING:
Only use replacement blades and blade bolts authorized
by the manufacturer of your riding mower. Unauthorized
blades and/or blade bolts could break, allowing the blade
to come loose, resulting in possible serious personal
injury and damage to the mower.
NOTE: Make certain all parts are replaced in the exact order
in which they were removed.
Move the mower to a level surface. Make sure to set the
parking brake and blade engage knob is down.
Stop the motor and remove the start key.
Raise the height of the cutting deck to its highest position
to allow access to blades.
NOTE: If necessary, raise the mower by placing on a lift or
using a jack and jack stands to gain access to the blades.
WARNING:
If raising the mower to access the blades, make sure the
mower is properly secured and the parking brake is set
before proceeding. Failure to properly secure the mower
could cause it to fall, resulting in death or possible seri-
ous personal injury.
ACRM051 BAGGING
REPLACEMENT BLADES
WRENCH
BLOCK OF WOOD
BLADE HALF
CIRCLE POST
BLADE HALF
CIRCLE HOLE
BLADE
SPRING
NUT
WASHER
English
SHAFT
BLADE
CIRCLE POST
BLADE
CIRCLE HOLE
BLADE
CENTER
BLADE
HOLE
BLADE
Fig. 1
Fig. 2