Steam Ironing - SOLAC CVG9507 Instrucciones De Uso

Prepare the appliance according to the
•
function you wish to use:
FILLING WITH WATER:
It is essential to have filled the tank with wa-
•
ter to be able to work with steam.
Open the cover.
•
Fill the tank, taking care to observe the MAX
•
level (Fig.1).
Close water inlet lid.
•
Use of scented water automatically cancels
•
the warranty
CVG9507 USE:
Unroll the cable completely before plugging
•
it in.
Connect the appliance to the mains.
•
Once plugged in, the product will start to
•
heat up, during this heating period, do not
press the steam button, wait for the green
light to come on,
SMART:
The product adapts to all types of fabric:
•
- Temperature for synthetic fibres (Polyester,
Nylon...). Setting ●
- Temperature for silk, wool. Setting ●●
- Temperature for cotton. Y linen
Setting ●●● and Max
Wait until indicator (C) lights green, this
•
means that the appliance has reached tem-
perature, after its first warm-up.
During use of the appliance, indicator (C)
•
will come on and off automatically to indicate
when it is using power and heating.
DRY IRONING:
The appliance has a steam control trigger
•
(B) which, when set to off, allows dry ironing
(without steam) or with steam depending on
whether the trigger is pressed (Fig. 2).

STEAM IRONING:

It is possible to iron with steam whenever
•
the tank is filled with water and the correct
temperature is selected.
VERTICAL IRONING:
It is possible to iron hanging curtains, items
•
of clothing on their own hanger, etc. To do
so, follow these instructions:
Iron from top to bottom,.
•
Important: for cotton and linen, it is recom-
•
mended to put the base of the iron in con-
tact with the material. For other more deli-
cate fabrics, it is recommended to keep the
base of the iron a few centimetres away.
AUTO-OFF FUNCTION (STAND-BY):
CVG9507;
For the purpose of saving energy, the appli-
•
ance switches to auto-off mode (stand-by)
after 8 minutes in the upright position or 30
seconds if left flat, assuming the user has
not performed any action during this peri-
od. 3 beeps will sound and the indicator will
flash RED GREEN alternately
To resume ironing just touch the trigger or
•
move the iron.
ONCE YOU HAVE FINISHED USING THE
APPLIANCE:
Unplug the appliance from the mains.
•
Drain the water out of the appliance.
•
Clean the appliance.
•
CLEANING
Disconnect the appliance from the mains
•
and allow it to cool before undertaking any
cleaning task.
Clean the equipment with a damp cloth with
•
a few drops of washing-up liquid and then
dry.
Do not use solvents, or products with an
•
acid or base pH such as bleach, or abrasive
products, for cleaning the appliance.
Never submerge the appliance in water or
•
any other liquid or place it under running
water.
HOW TO DEAL WITH LIME SCALE INCRUS-
TATIONS:
For the appliance to work correctly it should
•
be kept free of limescale or magnesium in-
crustations caused by the use of hard water.
To avoid this kind of problem it is advisable
•
to use distilled water.
To prevent this kind of problem, we recom-
•
mend the use of water with low lime or mag-
nesium mineralisation.
To do so, we recommend the use of the spe-
•
cific product for this kind of appliance, which
can be found in specialised shops and au-
thorised technical services.
A specific anti-lime scale product should be
•
used on this kind of product.
Home-made solutions, such as the use of
•
vinegar, are not recommended for descaling
this appliance.
EN