Publicidad
Idiomas disponibles
Idiomas disponibles
3
2
4
3
18
2 X2
Locate both hinges at opposite
sides from each other in the
Jump Mat and Frame
Insert the Safety Hook (2) bolt
through the small openings of
the hinges, and secure it once it
shows through the other side
with the Hook attached in its
head
Do this with both hooks to
prevent the Mat from unfolding.
3 X1
With the leg screws of the Mat
facing up, insert the Frame Pad
so that all 6 openings meet the
leg screws and the Frame Pad
is installed properly
NOTE:
Make sure that the Frame Pad
is covering all Loops from the
Mat to avoid injury.
5
5
4
6
8
5
7
5
4 X6
5 X4
Install all the legs (4) into the
corresponding threaded
connections of the frame. Place
4x Leg Caps (5) while leaving
two Legs without caps as shown
for Step 6.
Flip the frame over to install
Handrails.
5 X2
7 X1
8 X1
Slide both Left Side Handrail (7)
& Right Side Handrail (8) to
their respective Legs and
secure with a Leg Cap. Do this
with both Side Handrails.
The top of both Handrails must
be facing each other
19
Publicidad
