Miele PWM 912 Serie Plano De Instalación página 33

WiFi/LAN inter-
face
Plinth
(APWM 029/033)
Vapour and foam
venting kit
(APWM 063)
The washing machine is equipped with a WiFi/LAN interface for ex-
changing data.
The data interface provided on the LAN connection complies with
SELV (Safety Extra Low Voltage) in accordance with EN 60950. The
LAN connection uses a RJ45 connector in accordance with EIA/
TIA 568-B.
Connected machines must also comply with SELV.
The washing machine can be installed on a plinth (open or box plinth,
available as an optional Miele accessory).
Elevating the washing machine gives a better ergonomic working po-
sition when loading or unloading. It also simplifies the installation of
a drain connection.
 The washing machine must be secured to the plinth immediately
after installation! The plinth must be secured to the floor!
There is a risk of the washing machine falling off a raised plinth dur-
ing a spin cycle if it is not secured.
If excessive suds form, foam may escape from the vapour vent. To re-
move the foam, an optional vapour and foam venting kit can be used.
en - Installation notes
33