Publicidad
Idiomas disponibles
Idiomas disponibles
B
Product usage
Install bottom cover
To realize quieter operation, a bottom cover is supplied with the unit (only applies to some of
the Hisense washers). After installing the cover at the bottom of the washer, the noise level
will be greatly reduced. Please ask for advice from specialists before installing the cover,
nevertheless, the machine can be used without the bottom cover.
Noise-reduction bottom plate installation instructions
1.
Before installing the noise-reduction bottom plate, align and paste the acoustic absorption
wool with and along the right-angle impression on bottom plate (this procedure is
unnecessary for some of the models without acoustic absorption wool).
2.
Remove surface paper on double sided tape at four sides of the bottom plate.
3.
Incline the machine to an angle of 40° and let the side with right-angle notch face towards
front of the washing machine, as shown in the figure. Insert the side with oblique-angle
notch between two foot screws at back of the washing machine completely in place.
Then, install the bottom plate and ensure that it contacts with bottom of the washing
machine closely.
Right-angle impression
Double sided tape
9
EN
Publicidad
