Publicidad
Idiomas disponibles
Idiomas disponibles
B
Product usage
•
Before inflowing, laundry detergent/washing powder can be added to pre-wash box, and
washing powder must be added to main wash box.
Extra rinse
•
After set the function of rinsing adding, the program runs the rinsing process once
again before running the softening, and the total running time of the program increases
accordingly.
Inlet water warning
If tap is not opened, or water pressure is over low,and display screen will prompt "F01" to
give alarm.
Drainage warning
If the pipe is squeezed, drainage will not be smooth. In case of failing to completely drain for
long time, display screen will prompt "F03" to give alarm.
Door lock icon
After the program starts the Door Lock icon will light up and the door will be locked.
•
After completing program, door lock unlocks automatically. When the washing machine
is paused, if the door lock opening conditions are met, the door lock will open.
•
When door lock indicator light flashes, door shall not be opened forcibly so as to avoid
personal injury.
Delay end function
Delay End function allows to run the machine at the consumers' convenience, for example,
at night when electricity is cheaper.
•
Only under the standby mode, this button is valid for selecting the reservation time.
•
After the reservation function is selected, the time will increase 1h when each time the
reservation button is pressed.
Before reservation, if the program time does not satisfy the integral multiple of 1h, it
shall be completed by pressing the reservation key for the first time, and then the time
increases 1h when each time the reservation button is pressed. If the reservation is
selected, before the program runs, the current reservation can be canceled by turning
the button to select other programs.
•
The delay time must be longer than the wash program length as the delay time is the
time program will finish. For example: if the selected program time is 02:28, the delay
time selected must be between 03:00 and 24:00.
•
When the reservation process is operated, the icon of "reservation time" will be on. When
the reservation process is finished, the icon of "reservation time" will be off.
•
If delay end is selected and start button is not pressed, delay can be canceled by rotating
rotary knob before starting.
•
To cancel the delay time during the delay program, you need turn the machine off by
pressing "On/Off" button for 2 seconds.
Mute function
When the machine is in the state of holding, pause or operation, press "Spin+ Option" buttons
for 2 seconds, The display will show "bEEp oFF" . All the buzzing will be turned off except
the alarms.
19
EN
Publicidad
