Publicidad
Idiomas disponibles
Idiomas disponibles
Warning of burns
•
Never try to iron garments being worn.
•
Do not touch the metal parts of the iron when in operation and for several
minutes after it is turned off since it could cause burns.
•
Do not aim the jet of steam towards parts of the body or pets.
Warning – material damage
•
We suggest you keep the original box and packaging. The warranty does not
cover any damage resulting from inadequate packaging of the product when
this is sent back to an Authorised Service Centre.
•
Remove all protections from the soleplate before using the appliance for the
first time.
•
The use of extensions not approved by the manufacturer can result in damage
to property and personal injury.
•
Do not use sparkling (carbonated) water.
•
When the iron is hot, do not rest it onto the connecting cable or the power
cord. Take special care in ensuring that the cable and the cord do not come
into contact with the soleplate when it is hot.
•
Do not pull the power cord to unplug the appliance.
•
The appliance must only be cleaned with a soft, slightly damped, cloth after
unplugging the iron and allowing all its parts to cool down. Never use solvents
which may damage the plastic parts.
•
To avoid damage and/or contamination of the water tank, do not put perfume,
vinegar, and starch, descaling agents, additives or any other type of chemical
product into the water tank.
•
Do not wrap the power cord around the soleplate, especially when the iron is
hot.
•
Do not put the soleplate in contact with metal surfaces.
•
Put the thermostat knob on MIN before storing the appliance. Turn off the
appliance by pressing the button. Always unplug the power cord and wait for
the iron to cool down.
•
The appliance is fitted with a special thermal safety device which prevents the
plate overheating. If any difficulty is experienced in resetting the appliance,
contact your nearest Authorised Assistance Centre.
- 3 -
Publicidad
