HAEGER SG-22B.001A Instrucciones De Uso página 8

Notes while ironing with steam
•
The temperature setting knob (9) should be in the "●●" or "●●●" position to produce steam.
•
If the steam button is operated continuously for more than 30 seconds, drops of water may
come from the steam holes in the plate of the iron. It is recommended that the button is used
for shorter periods.
•
During the emission of the steam a vibration is felt coming from the inside of the body, it is the
pump that pumps the water from the tank to the iron.
•
During ironing, if the indicator light goes out from time to time, this can be ignored, as it simply
means that the iron is maintaining its correct operating temperature.
•
Make sure that the iron is placed on the heat-resistant base (11) when not in use.
•
Make sure that the continuous steam setting button (2) is deactivated when placing the iron
on the heat-resistant base.
•
Make sure you do not iron the same fabric surface for a long time because it can damage the
fabric.
•
The interconnection cord (14) is very hot during use. Do not touch to avoid burns.
Use of the Appliance-Dry Ironing
The water tank (7) does not need water when ironing without steam. If it is full, it can be emptied
or left so that it is ready for the next use with steam.
1. Connect the power cable (13) of the appliance to the wall outlet.
2. Turn the temperature setting knob (9) to the desired temperature. The temperature
indicator light (8) will light up.
3. When the device is ready for use, the temperature indicator (8) will turn off.
4. When you finish ironing, turn the temperature setting knob (9) to the "MIN" position and
disconnect the appliance from the socket.
5. Let the appliance cool down and store the power cable (13) and interconnection cord (14) in
the cable storage box (12) before storing the appliance.
Vertical Steam Ironing
The vertical steam ironing system allows you to use the iron for vertical ironing. This is especially
useful for getting wrinkles out of hanging clothes, curtains etc.
1. Follow steps 1-5 in "Use of the appliance - Steam ironing" section.
2. Hang the garment on a clothes' hanger and pull the garment tight with one hand.
3. Hold the iron in vertical position with the other hand and press the steam button (3) to iron
the garment.
4. Touch the garment lightly with the soleplate of the iron to remove creases.
5. When you finish ironing, turn the temperature setting knob (9) to the "MIN" position and
disconnect the appliance from the socket.
6. Let the appliance cool down and store the power cable (13) and interconnection cord (14) in
the cable storage box (12) before storing the appliance.
- 6 -