Velleman DEM702 Manual Del Usuario página 4

When measuring or positioning a dynamic target (such as: crane,
construction machinery or platform), incorrect measurement results may be
caused by unexpected conditions. Preventive measures:
Only use your instrument for measuring instrument, rather than the
controlling instrument. Your system must be set: in error measurement,
power failure or a sudden situation, still can take safety measures such as
safety limit switch, without causing any damage.
Warning:
Disused battery can't be dealt with living garbage. Please send waste
batteries in accordance with the national or local regulations for recycling.
This product can not be together with household garbage recycling.
Please recycle the product correctly.
Please recycle the product according to the national or local
regulations.
Avoid irrelevant personnel in contact with the product.
Technical support: also can consult your local dealer.
Warning:
Only use the USB-C port with rechargeable Li-Ion AA 3.7V (type 14500)
batteries in the device.
The device is also compatible with alkaline AA 1.5V batteries. Do not
connect the USB-C port when Alkaline batteries are installed.
Do not recharge alkaline batteries!
Electromagnetic compatibility (EMC)
"Electromagnetic compatibility" is defined as follows: work steadily under
the environment of electromagnetic radiation and electrostatic charge, and
no other equipment caused by electromagnetic interference.
Warning:
Already meet relevant regulations and standards. But the electromagnetic
radiation may interfere with other instruments.
Caution:
Don't try to repair the product yourself. When there is a problem with the
product, please contact your local agent.
V. 01 – 23/01/2024
DEM702
4 ©Velleman Group nv