Velleman DEM702 Manual Del Usuario página 8

8. Measurement
A single distance measurement
start laser. Press
results displayed immediately on the screen.
Maximum/minimum distance measurement
This feature enables users to set out from a measurement point, measure
the maximum or minimum distance. Such as: Measure the spacing, diagonal
distance measuring room (the maximum measured value) or horizontal
distance (minimum measured value) or maximum differential value of the
minimum value.
hold the button until you hear beep. By sweeping a laser large area
around the measurement target (such as a corner).
click this button, stop continuous measurement. The corresponding
maximum or minimum measured values will be displayed on screen, and the
last measured values as shown in the screen.
V. 01 – 23/01/2024
DEM702
button again, trigger measurements. Measurement
8 ©Velleman Group nv