Velleman DEM702 Manual Del Usuario página 11

be displayed on the LCD screen.
Indirectly - through two auxiliary measurement to
•
determine the distance.
Press
laser is on at the same time.If the horizontal distance is
measured, it will be fixed together and the distance can be
confirmed by pointing the light point to points (1) and point (2).
Press this button to the hypotenuse (1) to measure; Then the
measurement data (1) will be displayed on the LCD screen.
Press this button again to the hypotenuse (2) to measure; At
this point the vertical distance (h) between (1) and (2) will be
V. 01 – 23/01/2024
DEM702
four times, icon will be displayed on screen and the
11 ©Velleman Group nv