Blackstone 2145EU Manual Del Propietário página 5

Model: 2145eU
Hardware pack (1 piece)
9
a. Control knobs (2 pieces)
b. M6x12 screws (2 pieces)
Spares (4 pieces)
c. Small thumb screws (2 pieces)
d. large thumb screw (1 piece)
e. Medium thumb screw (1 piece)
TOOL NEEDED:
ASSeMBlY INSTRUCTIoNS
er Adjustable wrench
Find a large, clean area to assemble your appliance�
Remove all packing material before assembling�
Sharp edges. Wear gloves while assembling.
NOT INCLUDED: TOOLS NEEDED:
AA battery #3 Phillips head screwdriver &
Adjustable wrench
53 g) 53 g)
With the help of another person, remove the griddle body
STEP 01
from the packaging and lay it upside down on a smooth, flat surface�
Unlatch and unfold the legs to their vertical position, then use two
(2) small thumb screws
ends of the left leg assembly�
NOT INCLUDED:
lPG cylinder
Size: 18 x 12 in (45 x 30 cm), 20 lb (9 kg) Size: 18 x 12 in (45 x 30 cm), 20 lb (9 kg)
SUPPORT BLACKSTONE EUROPE.COM BLACKSTONEPRODUCTS.COM/SUPPORT
lPG cylinder must include collar to lPG cylinder must include collar to
protect lPG cylinder valve. protect lPG cylinder valve.
TOOL NEEDED:
5mm Allen wrench
CAUTIoN
TOOL NEEDED: NOT INCLUDED:
#3 Phillips head screwdriver one (1) AA battery (for ignition)
optional four (4) AA batteries
(for the motor)
[c.] to attach the two (2) wheels onto the
NOT INCLUDED:
lPG cylinder
Size: 4 x 8 in (10 x 20 cm), 1 lb (453 g) Size: 4 x 8 in (10 x 20 cm), 1 lb (453 g)
[a.]
[b.]
[c.]
Heavy pieces. Two people should assemble this appliance.
• DO NOT mix old and new batteries.
TOOL NEEDED:
• DO NOT mix alkaline, standard (carbon-zinc) or rechargeable
Adjustable wrench
(ni-cad, ni-mh, etc.) batteries.
NOT INCLUDED:
AA battery
ASSEMBLY GUIDE | OWNER'S MANUAL
[d.]
[e.]
CAUTIoN
NOTICE
TOOL NEEDED:
5mm Allen wrench
ELECTRIC REQUIREMENTS:
120V 60Hz
NOT INCLUDED:
one (1) AA battery (for ignition)
optional four (4) AA batteries
(for the motor)
Pl
su
Ho
ap
DO
05