Descargar Imprimir esta página

Nikon AF-I Nikkor ED 500 mm f/4 D IF Manual De Instrucciones página 11

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

NOMENCLATURE
(T) Lens hood screw
(2) Focus lock buttons (four buttons
provided)
(3) Distance index
(4) Depth-of-field indicators
© Distance scale
(6) Focus mode ring
@ Tripod collar alignment index
(8) Tripod collar alignment scale
(9) Filter holder mounting index
@ Filter holder knob
® Lens hood HK-21
@ Focusing ring
@ Focus mode button
@ Focus mode index
@ Tripod collar lock screw
® Built-in rotating tripod collar
@ Strap eyelets
® Focusing limit switch
® Glass filter holder
@ Gelatine filter holder plate
@ Gelatine filter holder
@ Aperture index
@ Aperture scale
(§) Minimum aperture lock lever
@ Aperture-direct-readout scale
@ Minimum aperture signal post (EE servo
coupling post)
@ CPU contacts
@ Aperture indexing post
@ Meter coupling ridge
@ Aperture ring
Before using your new lens, read the following carefully so you get the most out of your
lens now and for years to come.
IMPORTANT!
• Be careful not to soil or damage the CPU contacts.
• Do not attach the following accessories to the lens, as they might damage the lens' CPU
contacts:
Auto Extension Ring PK-1, Auto Extension Ring PK-11/PK-11A, Kl Ring, Auto Ring
BR-2/BR-2A/BR-4.
• This lens cannot be used with the AF Finder DX-1 attached to the Nikon F3AF camera.
MOUNTING THE LENS
To mount, position the lens on the camera's bayonet mount, lining up the aperture index on the
lens with the lens mounting index on the camera. Twist the camera body clockwise until it
clicks into place.
To remove, press the lens' release button on the camera and turn the camera body
counterclockwise. For details, refer to the camera's instruction manual.
11

Publicidad

loading