Care and
Maintenance
(continue€
To Remove
the Fine
Filter:
Lift the Fine Filter from the dbhwasher
floor as
shown
in Figure 32 and flush it clean by holding it
under running water.
Figure 32
Fine
Filter
To reinstall
the filter
system:
1. Return the Fine Filter to its installed
position.
2. Place the Large Object Trap/Fine
Filter
Assembly
into its instalbd
position
in the
dbhwasher
floor.
3_
Turn the ring handle clockwise
1/4 turn until
it is locked.
The arrow on the ring handle
and the arrow on the Fine Filter should
point
to each other, as shown by the circle in
Figure 33.
Figure 33
To avoid
possibme
dishwasher
damage,
do
not use harsh
chemicams,
abrasive
cmeaners,
scouring
pads (metal
or plastic),
or abrasive
cloths/paper
towels
to clean
your
dishwasher's
exterior
door
panel
Your dishwasher's
exterior
door
panel
can
be damaged
by doing
so.
Clean
the Exterior
Door Panel
Colored
Doors
Use only a soft cloth that is lightly dampened
with
soapy water.
Stairfless
Stee_ Doors
Use a soft cloth with a non-abrasive
cleaner
(preferably
a liquid spray) made for cleaning
stainless
steel. For the best results,
apply the
stainless
steel cleaner
to the cloth, then wipe the
surface.
CWean the Door Gasket
Regularly
clean the door gasket with a damp
cloth to remove food particles
and other debris.
4. Gently pull the ring handle to ensure that the
assembly
is locked into place.
16