HAMPTON BAY SCENIC Guía De Uso Y Mantenimiento página 10

Assembly - Attaching the Light Kit Fitter Assembly
1
Installing the light kit pan
IMPORTANT: It is critical to attach the light kit pan (F)
using the quick connector. The fan will not operate
unless the light kit pan (F) is connected to the fan.
CAUTION: To reduce the risk of electric shock, disconnect
the electrical supply circuit to the fan before installing the
light kit pan.
□
Remove one screw (PP) from the black bracket below the
fan motor assembly (B), and loosen but do not remove the
other two screws.
□
Push the 9-pin connectors of the motor assembly through
the hole of the light kit pan (F).
□
Connect the wires from the light kit pan (F) to the wires
from the fan motor assembly (B) by connecting the 9-pin
connectors together. Carefully tuck all wires and splices into
the switch cup.
□
Push the light kit pan (F) up to the fan motor assembly (B) so
that the two loosened screw heads fit into the keyhole slots.
Turn the light kit pan (F) clockwise. Re-install the screw (PP)
that was removed in step 1.
□
Make sure all the screws are firmly tightened.
2
Attaching the light kit fitter
assembly
□
Remove one screw (QQ) from the light kit pan (F) and loosen, but
do not remove the other two screws.
□
Connect the wires from the light kit fitter assembly (G) to the
wires from the fan motor assembly (B) by connecting the molded
adaptor plugs together. Carefully tuck all wires and splices into
the switch cup.
□
Push the light kit fitter assembly (G) up to the light kit pan (F)
so that the two loosened screw heads fit into the keyhole slots.
Turn the light kit fitter assembly (G) clockwise to secure.
□
Re-install the screw (QQ) that was removed in step 1.
□
Make sure all the screws are firmly tightened.
10
B
F
PP
E
F
G
QQ