Publicidad
Idiomas disponibles
Idiomas disponibles
3 EN-US English
7.
Do one of the following:
•
Move the image to the computer using a drag-and-drop operation in Mi-
crosoft Windows Explorer.
Note Moving an image using a drag-and-drop operation does not de-
lete the image in the camera.
•
Move the image to the computer using FLIR Tools. In FLIR Tools you can
analyze the images and create PDF reports.
Note The function of the trigger is configured by a setting in FLIR Tools. For
more information, refer to the user's manual.
3.8 Camera parts
See Figure 2.1 Camera parts, page 2.
1.
USB Mini-B connector: Connect to a computer to download images (FLIR
K53 only) and change settings using FLIR Tools.
2.
Attachment point for the lanyard strap/neck strap (left and right sides).
3.
Eccentric latch to secure the battery.
4.
On/off button. This button has three functions:
•
Push the on/off button to turn on the camera.
•
Push and hold the on/off button for more than 3 seconds but less than 10
seconds to put the camera into standby mode. The camera then auto-
matically turns off after 6 hours.
•
Push and hold the on/off button for more than 10 seconds to turn off the
camera.
5.
Pin hole for setting of the temperature unit (°C/°F).
6.
Connectors for the in-truck charger.
7.
Trigger.
8.
Mount for the tripod adapter.
9.
Attachment point for the retractable lanyard.
10. Battery.
3.9 Screen elements
See Figure 2.2 Screen elements, page 3.
1.
Low-sensitivity mode indicator. The indicator is displayed when the camera
identifies a hot area and automatically switches to the low-sensitivity mode.
#T810193; r. AF/53146/53146; mul
6
Publicidad
