Avalon A3F Manual De Uso Y Mantenimiento página 25

Replacing the Filters Replacing the Filters Replacing the Filters
1. When the lifetime of the filters are near their end, either by means of water flow or by
means of 6 months time, the Heating (#2) and Cooling (#3) indicator lights on the front panel
will blink as a warning. They will continue to blink until the filters are replaced and reset. You
may also notice that the water stops pumping until the filters are replaced.
2. Open the cabinet door.
3. Remove the included 5 gallon water bottle from the cabinet.
4. Remove the probe assembly from
inside the 5 gallon water bottle and
hang it on the probe hanger.
Replace Filters
5. Twist the expired filters to remove
them. Insert the new filters into the Filter
Adapters by twisting them into place
and rotating them clockwise.
English
User Guide and Maintenance
FILTER RESET
Multi-Layer Carbon
Sediment Block
20