Optional Blade Spacing - Toro 03664 Manual Del Operador

Optional Blade Spacing

.50 inch Blade Spacing for Model 03664
To change the configuration of the verticutter from the
standard .75 inch spacing to .50 inch spacing requires
1. .50 inch spacing
1.00 inch Blade Spacing for Model
03684
To change the configuration of the verticutter from the
standard 1.25 inch spacing to 1.00 inch spacing requires
1. 1.00 inch spacing
an additional (34) spacers, part no. 17-1580 and an
additional (10) carbide blades, part no. 106-6355 or
an additional (10) regular blades, part no. 17-1590
(Figura 13).
Figura 13
2. .75 inch spacing
(19) new spacers, part no. 93–3092 and an additional (4)
carbide blades, part no. 106-8625 or an additional (4)
regular blades, part no. 93–3038–03 (Figura 14).
Figura 14
2. 1.25 inch spacing
12
1
2
1
2
G017456