Eureka ATOM W 65 Instrucciones De Manejo página 38

5.3.2 DISPLAY BRIGHTNESS
This screen is used to set the brightness of the display.
Press the "+" and "-" keys to increase or decrease the
brightness.
5.3.3 DOSE SELECTION MODE
This screen allows setting the dose selection mode.
• ON: before each dispensing cycle, the dose must be selected.
• OFF: the last dispensed dose is selected.
5.3.4 GRINDER MAINTENANCE
On this screen it is possible to set and reset the grinder change counter as well as
enable or disable the grinder change alarm. Pressing the button
SET, it is possible to activate or deactivate the grinder change alarm using the ON/OFF
keys. When the alarm is activated, in the case of grinder to be replaced, the icon (F) will
light up on the main screen. The RESET button, if pressed, resets the grinder change
counter and the icon (F) will disappear. Finally, it is possible to set the size and type of
grinders.
38
EN