Worx Nitro WG581E Manual Original página 9

shields, or without safety
devices.
j) Keep the power source
clean of debris and other
accumulations to prevent
damage to the power
source or possible fire.
k) Do not transport this
machine while the power
source is running.
l) Always disconnect the
machine from the power
supply (e.g. remove the
battery pack from the
machine)
-whenever you leave the
machine,
-before clearing blockages
or unclogging chute,
-before checking, cleaning
or working on the machine.
m)Avoid using the machine
in bad weather conditions
especially when there is a
risk of lightning.
4) Maintenance and storage
a) keep all nuts, bolts and
screws tight to be sure the
appliance is in safe working
condition.
b) Replace worn or damaged
parts.
c) Use only genuine
replacement parts and
accessories.
d) Store the machine in a dry
40V Cordless Blower
place out of the reach of
children.
e) When the machine is
stopped for servicing,
inspection, or storage, or
to change an accessory,
shut off the power source,
disconnect the machine
from the supply and make
sure that all moving parts
are come to a complete
stop. Allow the machine
to cool before making any
inspections, adjustments,
etc. Maintain the machine
with care and keep it clean.
f) Store the machine in a dry
place out of the reach of
children.
g) Always allow the machine
to cool before storing.
h) Never attempt to override
the interlocked feature of
the guard.
This is a class III appliances
and it must only be supplied
at safety extra low voltage
corresponding to the marking
on the appliance.
WARNING: For the purposes
of recharging the battery, only
use the detachable supply unit
provided with this appliance.
9
EN