Skotti-grill SKOTTI CAP Manual De Instrucciones página 4

2 SET UP:
MAKE 1 FROM 8 IN 6 STEPS
Step 1:
• Take the long side panel with the Skotti logo and the small tri-
angle mark facing upward in your left hand.
• Take the short foot panel with the triangle mark facing upward
in your right hand and slide the short panel onto the longer one
at the corresponding triangle-adjacent slits.
Step 2:
• Slot the other long side panel with the Skotti logo onto the foot
panel at the open slim slits.
6
SET UP SET UP
Step 3:
• Slide the bottom panel into the three-sided structure, pointed
side down and the long tabs with the triangle mark towards
the foot panel.
• Make sure that the hooks and tabs are at an equal height with
the slits.
• Slide the large tabs with a triangle mark on the cover plate into
the corresponding slits on the short foot panel. Slide the hooks
on the big cover plate into the slits on the long side panels and
slot the cover plate onto the short foot panel at the slits. Both
triangle marks of the large tabs should be visible.
7