Skotti-grill SKOTTI CAP Manual De Instrucciones página 5

Step 4:
• Take the short head panel and slot it onto the long side panels
at the two open slits and push it down all the way to the end.
Step 5:
Lock Skotti CAP
• Pull the cover plate back towards the short head panel using
the two larger hooks protruding from the sides. The cover
should lock in place..
8
SET UP SET UP
Step 6:
Put the handles/grill tongs together
• Take the three parts for the handles/grill tongs of your Skot-
ti CAP. Put the rods together so that the ends with the slot
openings face each other and the Skotti logos on the rods face
outward. Insert the finished handle from the outside into the
free rectangular slots on the two long side panels..
Done!
3 DISSEMBLING:
HOW TO PUT YOUR SKOTTI CAP BACK INTO ITS BAG
When your Skotti CAP has cooled down after grilling, you can
easily stow it away in the canvas bag, saving space. Simply take it
apart in the reverse order of assembly:
Take apart the handles/grill tongs. To unlock the cover plate, lift
up its large tabs. Then you can remove the small head part, fol-
lowed by the cover plate, one side panel and the foot panel one
after the other.
9