Troubleshooting - Orbio 5000-Sc Manual Del Operario

TROUBLESHOOTING

Problem
Dispensing nozzle not
dispensing water
Bottle fill nozzle not
dispensing water
Solution leaking from the
5000--Sc
5000- -Sc DM20001 (2- -12)
Home
Cause
Condition displayed on display panel Eliminate condition (See
Dispensing nozzle not returned to
dispensing nozzle dock after use
Power cord not plugged into outlet
Dispensing nozzle on/off knob in
OFF position
Add salt indicator flashing /
illuminated
Condition displayed on display panel Eliminate condition (See
Power cord not plugged into outlet
Dispensing tube plugged
Add salt indicator flashing /
illuminated
Loose or damaged fitting. Damaged
salt reservoir or solution storage
tanks
Find... Go To..
OPERATION EN
Remedy
INDICATORS)
Return dispensing nozzle to dock to
reset the pump timer (Press Reset
button / Indicator if necessary)
Plug power cord into GFCI outlet
Turn Dispensing nozzle on/off knob
to ON position
Fill tank with salt (See FILLING
THE SALT RESERVOIR)
Check for salt bridges in salt
reservoir. Break salt bridges loose
to provide salt to system
INDICATORS)
Plug power cord into GFCI outlet
Clear dispensing tube
Fill tank with salt (See FILLING
THE SALT RESERVOIR)
Check for salt bridges in salt
reservoir. Break salt bridges loose
to provide salt to system
Unplug 5000--Sc power cable from
electrical outlet and contact a
TENNANT service representative
11