Safety Precautions - Orbio 5000-Sc Manual Del Operario

EN OPERATION
The following precautions are used throughout
this manual as indicated in their description:
WARNING: To warn of hazards or
unsafe practices that could result in
severe personal injury or death.
CAUTION: To warn of unsafe practices
that could result in minor or moderate
personal injury.
FOR SAFETY: To identify actions that must be
followed for safe operation of equipment.
This machine is designed solely for creating,
storing, and dispensing 5000--Sc cleaning
solution.
The following information signals potentially
dangerous conditions to the operator or
equipment. Read this manual carefully. Know
when these conditions can exist. Locate all safety
devices on the machine. Then, take necessary
steps to train machine operators. Report machine
damage or faulty operation immediately. Do not
use the machine if it is not in proper operating
condition.
WARNING: Electrical Hazard.
- - Do not operate with damaged power
cord.
- - Unplug power cord before servicing
machine.
- - Do not modify plug. If the power cord
is damaged or broken, it must be
replaced by the manufacturer or its
service agent or a similarly qualified
person in order to avoid a hazard.
WARNING: Electrical Shock Hazard.
Do Not Use Outdoors. Do Not Expose
To Rain / Moisture. Store Indoors
2
Home

SAFETY PRECAUTIONS

FOR SAFETY:
1. When machine is installed:
- - Make sure it is installed on a stable
2. Before operating machine:
- - Unless trained and authorized.
- - Unless operator manual is read and
- - Unless mentally and physically
- - If it is not in proper operating
- - Unless cord is properly grounded.
- - With damaged cord or plug.
3. Before operating machine:
- - Follow safety guidelines concerning
- - Make sure all safety devices are in
4. When using machine:
- - Do not unplug by pulling on cord.
- - Do not handle plug with wet hands.
- - Do not stretch cord.
- - Keep cord away from heated surfaces.
- - Report machine damage or faulty
- - Never allow children to play on or
5. When servicing machine:
- - Unplug cord from wall outlet.
- - All repairs must be performed by an
- - Use manufacturer supplied or
- - Do not modify the machine from its
6. When using cleaning solution:
- - Do not mix 5000- -Sc cleaning solution
- - Do not drink cleaning solution.
- - Refer to MSDS (Material Safety Data
Find... Go To..
surface with a tilt of 5 degrees or less
in any direction.
understood.
capable of following machine
instructions.
condition.
wet floors.
place and operate properly.
operation immediately.
around machine.
authorized service person.
approved replacement parts.
original design.
with conventional cleaning chemicals.
Sheet) for additional safety
information and precautions.
5000- -Sc DM20001 (4- -11)