EN OPERATION
FILLING THE SALT RESERVOIR
Fill the salt reservoir with salt whenever the Add
salt indicator begins flashing or stays illuminated.
Use standard water softener salt pellets (solar or
evaporated). Do not use rock salt to fill salt
reservoir.
1. Remove the cover from the salt reservoir.
2. Pour the bag of salt into the salt reservoir. Fill
the salt reservoir to approximately 50 mm
(2 inches) below the salt reservoir opening
3. Reinstall the cover onto the salt reservoir.
12
Home
MAINTENANCE
4. If the Add salt indicator and Reset button /
Indicator stays illuminated, press the Reset
button / Indicator. Allow the system to
generate solution.
5. The 5000--Sc is ready for use when the Power
/ Generating indicator is flashing or stays
illuminated.
CARBON FILTER
The carbon filter requires no regular maintenance.
Unplug the machine power cable from the
electrical outlet and call a TENNANT service
representative if the drain line is disconnected
from the carbon filter.
Find...
Go To..
5000- -Sc DM20001 (2- -12)