Kohler K-11933 Guia De Instalacion página 3

Faucet
Undercover
Inlet
Apply
plumbers
putty.
Nut
1. Install the Faucet Body
Apply a bead of plumbers putty or other sealant to the underside
of the undercover according to the manufacturer's instructions.
Position the undercover over the mounting holes. Press the
undercover down until it is snug against the sink.
From the top of the sink, insert the faucet body inlets into the
mounting holes.
From the underside of the sink, thread a nut onto each handle
valve.
Securely hand tighten the nuts.
Remove any excess putty or sealant.
2. Complete the Installation
Install the sink (if needed) according to the sink manufacturer's
instructions.
Identify the supply connection type.
Connect the supply tubes to the handle valves, and the supply
stops. Left is hot, right is cold.
Tighten all connections.
Turn on the water supply and check all connections for leaks.
Repair as needed.
Kohler Co.
Compression
Union
Nut
Hot
3
Cold
085501-2-AD