Publicidad
Idiomas disponibles
Idiomas disponibles
Operation
Preparing for Use
Before first use, please charge the appliance for 4-5 hours (refer to "Charging Instructions" for details).
* Based on results from Tineco lab tests. Lab temperature 39.2°F (4°C) ~ 104°F (40°C). Use directly
when you just need to absorb water; add water/solution when you need to deep clean the floor
(refer to "Filling Clean Water Tank" for details).
Switch ON to start the appliance, pull the
solution trigger to spray liquid as needed. To
enter Spot mode, press SPOT button and pull
the trigger to remove tough spots and stains with
stronger spray.
Stop Working
The appliance will stop working when put uprightly
and start running again when you recline.
* Do not recline more than 144° to protect
against water leakage.
Note:
• Do not vacuum foamed liquid.
• It takes about 5 mins to dry the floor in normal mode/8 mins in Spot mode, depending on cleaning
environment.
• To dry the floor faster and avoid over wetting, please release the trigger after each spray of liquid.
Start Again
Squeeze the Solution trigger when moving
backward to spray liquid as needed.
Place the appliance on the storage tray
vertically after use.
27
Publicidad
