Tineco iFLOOR 2 Serie Manual De Uso página 35

Brush Roller Cover
Grab the front handle while pressing the
button and pull upward to remove.
click
②
Brush Roller
Remove the brush roller by grabbing the
brush roller tab and pulling upward.
Remove hair and debris from the brush roller
chamber and the opening with a tissue or a
damp cloth.
Note:
To maintain high performance, replace the brush roller every 6 months.
Rinse with water.
When replacing, always latch the brush cover into
place to avoid leakage.
①
Remove the brush roller tab. Using the cleaning
tool, remove the hair and debris wrapped around
the roller and rinse with water. Replace the brush
roller back onto the storage tray, and allow it to dry
completely before reinstalling.
Replace the brush roller by inserting the brush
roller end into the right side of the holder, then lock
the pull tab into place by pressing downward.
33