2. Use:
Do not use this barbecue
unless all parts are in
place. The device must
be
correctly
installed
according
to
assembly
enclosed leaflet.
A/ Before cooking
IMPORTANT:
WHEN THE APPLIANCE IS
NOT IN USE, ALWAYS
UNPLUG THE POWER
CORD
FROM
ELECTRICITY
BEFORE
FITTING
REMOVING
ATTACHMENTS
BEFORE CLEANING THE
APPLIANCE.
N.B: Before the first use
of the appliance, it's
recommended to clean
it and to make it running
idle: Clean the cooking
plate with a wet rag or
sponge, and then dry it.
Plug the appliance and
put it on during 10
minutes.
During the first uses,
appliance can release
some
odor; it's normal and it
will not affect appliance
the
functioning.
manual
After 10 minutes, unplug
the appliance and let it
cool down.
When the appliance is
cold, clean the cooking
EVEN
plate.
-Before use, wash the
hotplate and the grease
THE
tray with hot water and
MAINS
a mild detergent. Dry
OR
them thoroughly.
SINGLE
To make cleaning easier,
OR
cover the grease tray
with tin foil to collect
any fats and juices.
Plug the power cord into
an
socket.
Turn
knob so that the desired
temperature is aligned
with the button of the
reference
indicator light will light
up.
smoke
and/or
earthed
power
the
thermostat
point.
The
When the indicator light
off
the
thermostat
switches off, this means
that
the
required
cooking
temperature
has been reached and
that the grill is ready to
use.
The indicator light on
the thermostat shows
that the grill is heating
up and it will stay lit
until the grill reaches the
set temperature; after
this, it will switch on and
off in cycles during the
cooking
process
guarantee
that
selected temperature is
maintained.
The pre-heating time
depends on the chosen
heat setting.
The higher the selected
temperature, the higher
the
preheating
required.
B/ Cooking
Using a rubber spatula
or kitchen tongs, place
the food you want to
cook on the hotplate.
to
the
time