Heat Level Control; Operation - Silvercrest SKGE 2000 C3 Instrucciones De Uso

Heat level control

The temperature is set using the heat level control
–
Heat level range 1: heating up range / low temperature
–
Heat level range 2: medium temperature (e.g. cooking vegetables)
–
Heat level range 3: high temperature (e.g. grill-roasting meat)
Heat level range 3
NOTE
► The green „Ready" control lamp
is set to MIN or in the front area of the heat level range 1. As soon as you
set the heat level control
"Ready"
► The green control lamp "Ready"
indicates that the temperature has fallen below the set temperature and the
appliance is heating up again.
► The red control lamp "Power"
nected to the mains.

Operation

1) Close the appliance lid using the handle.
2) Slide the fat collector tray
3) Replace the plug in the mains power socket. The red control lamp "Power"
lights up. The green control light "Ready"
is set to MIN.
4) Set the desired level on the heat level control
"Ready"
as soon as the set heating level is reached.
■ 88 │ GB │ MT
to the desired position, the green control lamp
goes out until the temperature has been reached.
lights up as soon as the appliance is con-
into the appliance.
goes out. The green control lamp "Ready"
.
Heat level range 1
Heat level range 2
lights up when the heat level control
may switch off again in the interim. This
lights up if the heat level control
. The green control lamp
comes on again
SKGE 2000 C3