Storage - Silvercrest SKGE 2000 C3 Instrucciones De Uso

Clean the hotplates
detergent in it. For severe incrustations, leave the hotplates
in the water. After washing, rinse the hotplates
detergent residues. Dry everything properly. The hotplates
you put them back in the appliance!
NOTE
To refit the hotplates
notches next to the fat outlet
front part of the hotplate
Proceed in the same way with the second hotplate
■ To clean the outer surfaces of the appliance, wipe it down with a damp cloth
and a small amount of washing-up liquid. Wipe off any detergent residues
using a cloth moistened with clean water.
Ensure that all parts are completely dry before re-using the appliance.
■ Wipe the cleaning scraper
add some mild detergent to the cloth or rinse it in warm water and detergent.
NOTE
■ Clean the emptied fat collector tray
Rinse off detergent residues with clean water and dry it well.
NOTE

Storage

Store the cleaned appliance in a dry place.
Lock the appliance by sliding the safety catch
■ 94 │ GB │ MT
which have been removed in warm water with a little
For gentle cleaning of the hotplates
wash them by hand, as described above. You can, however, also
clean the hotplates
, place the hotplates
grip the hooks on the base. Then press down the
until you hear it engage.
For gentle cleaning of the cleaning scraper
you wash it by hand as described above. You can, however, also
clean the cleaning scraper
For gentle cleaning of the fat collector tray
you wash it by hand as described above. You can, however, also
clean the fat collector tray
with clean water to remove all
, we recommend that you
in the dishwasher.
onto the base such that both
.
with a damp cloth. For more stubborn soiling,
in the dishwasher.
in hot water and washing-up liquid.
in the dishwasher.
to the position
to soak for a while
must be dry before
we recommend that
we recommend that
.
SKGE 2000 C3