GB
Important:
Possible damage to the pump due to dry
operation. If the pump ceases to produce
liquid, never let it run dry for more than
30 seconds.
6. Switch off the pump (switch to "O") once the
dispensing process is complete.
i
Important:
Never switch off the pump by disconnect-
ing the terminal clamps or pulling out the
mains plug.
Important:
Danger of burns due to hot surface and
possible damage to the pump due to
overheating. Work cycles of > 10 minutes
can cause the temperature of the motor
to rise. After each work cycle of maxi-
mum 10 minutes, always allow for a cool-
ing period of equal length, with the motor
switched off.
18