Craftsman 320.39588 Manual Del Propietário página 10

ORBITAL MOTION
Orbital motion is ideal for fast cutting action when removing old finishes,
smoothing rough wood, cutting stock down to required dimensions or for
finishing surfaces to be painted. The sandpaper moves in tiny circles at a very
high speed, allowing the sander to move easily.
PRESSURE CONTROL
Your tool is equipped with pressure=control indicator lights. The indicator lights will
let you know if you are applying the proper amount of pressure during operation.
DUST BOX
Translucent dust box with micro=fine filter provides for efficient dust control
and extraction.
DUST=EXHAUST PORT
The Dust=exhaust Port allows you to connect to a 1=1/4 in. diameter vacuum
hose to help keep the work area clean.
ON/OFF ROCKER SWITCH
The dust=sealed on/off rocker switch is conveniently located for easy control,
sealed to keep out dust for long life.
LED WORKLIGHT
The LED worklight, located in the front of the tool, illuminateswhen the rocker
switch is in the ON position. This feature provides extra light for increased visibility.
PAPER CLAMP
The sander has two paper clamps designed to secure standard sandpaper to
the platen.
PAPER PUNCH
The paper punch can be used to punch holes in sandpapers, to allow sanded
material to pass through the sheet sander into the dust box or through a vacuum.
LIVE=TOOL INDICATOR LIGHT
The LED indicator light illuminates green when the tool is plugged into a
power source.
i0